This tutorial will guide you to Make Windows 8 Consumer Preview Portable
You will need:
- USB Stick or External Hard drive
Must be greater than 16GB
Preferably USB 3.0
- Lots of Time
I have also created a video where you as how to port Windows 8 consumer preview on external drive. You can view the video or continue reading the article-
THIS IS RECOMMENDED FOR ADVANCED USERS ONLY
- Download the Windows 8 Consumer Preview ISO file from http://windows.microsoft.com/en-US/windows-8/iso – Make a note of the product key
- Download the Windows Automated Installation Kit (WAIK) from http://www.microsoft.com/download/en/details.aspx?id=5753
- Download and install Virtual Clone Drive from http://www.slysoft.com/en/download.html – (This step is only required if you can’t already mount ISO files).
When the WAIK has finished downloading, mount it (using the Virtual Clone Drive) and then open the installer which will appear as a CD drive. Once the setup loads click ‘Windows AIK’ from the sidebar and follow through the installer.
Once the installation is complete navigate to (If it was installed to the default location):
C:\Program Files\Windows AIK\Tools
If you have a 64 bit computer open the “amd 64” folder. Alternatively, if it is 32 bit open the “x86” folder. Copy the “imagex.exe” file and paste it in the root of the C drive (C:\). If a warning message appears click ‘Continue’.
Next, mount the Windows 8 Consumer Preview ISO. Then open command prompt by typing “cmd” in the start menu. Right hand click on it and select ‘Run as Administrator’.
Plug in the external hard drive or USB stick. WARNING: All existing data is going to be erased from the device.
Next, enter the following commands:
diskpart list disk
All the disks currently connected to your computer will then be displayed.
Replace * with disk number you are going to be installing the Windows 8 Consumer Preview on.
select disk * clean create partition primary format fs=ntfs quick active assign exit
Replace @ with the virtual CD drive letter (the mounted ISO).
Replace # with the drive letter of the external hard drive or USB stick.
C:\imagex.exe /apply @:\sources\install.wim 1 #:\ bcdboot.exe #:\windows /s #:
To finish the installation you will now need to restart your computer. Make sure that it boots from the USB stick or external hard drive. (If you don’t know how to do this check with your PC manufacturer or look in the bios settings). The computer will then restart several times (make sure it boots from the USB stick each time).
Next, enter the product key and confirm you agree to the terms and conditions. Then fill out the personalization settings to complete the installation.
You now have a portable copy of the Windows 8 Consumer Preview. Remember not to remove the USB stick or external hard drive whilst the computer is running the Windows 8 Consumer Preview.
Comment below to let me know how you have got on